- Главная страница
- Поиск продуктов
- PUR
- Ebalta GM 986-1 / Comp. A+B
Ebalta GM 986-1 / Comp. A+B
| Категория | PUR, Polyurethane , PUR, Unspecified |
| Производитель | Ebalta Kunststoff GmbH |
| Торговая марка | Ebalta |
| Порт | Китай Шанхайский порт |
| Торговые условия | FOB, CFR, CIF |
| Платежное средство | L/C, T/T, Western Union |
lelAyu_Ebalta-GM-986-1-Comp-A-B.pdf  |
|
| Контактная информация |  Служба поддержки клиентов Вичат |
|
|
|
Описание материалов:
GM 986-1 Comp. B (Amine) can be subject to colour variations due to raw materials, but these colour variations have no influence on the quality and the properties of the product.
This material is most suitable for high pressure moulding plants with high moulding pressure and temperature resistance. For application at 60°C Shore hardness D is between 60-62!
The postcured material is not UV stable and darkens by and by. However according to our experience the change in colour does not affect its utilizability.
As bonding agent on aluminium support we recommend our PU coupling paste KP 8.
The material is also dimensionally stable at high temperatures. At a mould temperature of approx. 60°C a Shore hardness D of 62-64 will still be reached.
Applications
Properties
This material is most suitable for high pressure moulding plants with high moulding pressure and temperature resistance. For application at 60°C Shore hardness D is between 60-62!
The postcured material is not UV stable and darkens by and by. However according to our experience the change in colour does not affect its utilizability.
As bonding agent on aluminium support we recommend our PU coupling paste KP 8.
The material is also dimensionally stable at high temperatures. At a mould temperature of approx. 60°C a Shore hardness D of 62-64 will still be reached.
Applications
- Foundry patterns
- Pattern plates
- fixtures
Properties
- non-toxic according to regulations for hazardous material
- Shore D hardness approx. 70
- dimensionally stable at high temperatures
- hard flexible
- well castable
- abrasion resistant
| Главная Информация | |
|---|---|
| Характеристики |
|
| Внешний вид |
|
| Метод обработки |
|
| Твердость | Номинальное значение | Метод испытания | |
|---|---|---|---|
| Твердость дюрометра (Shore D) | 68 - 72 | ISO 7619 |
| Механические | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Tensile Stress | 30.0 - 40.0 | MPa | ISO 527-2 |
| Растяжимое напряжение (Break) | 130 - 170 | % | ISO 527-2 |
| Флекторный модуль | 750 - 950 | MPa | ISO 178 |
| Флекторный стресс | 30.0 - 40.0 | MPa | ISO 178 |
| Flexural Strain at Flexural Strength | 7.5 - 8.5 | % | ISO 178 |
| Термокомплект | Номинальное значение | Единица измерения | |
|---|---|---|---|
| Компоненты термокомплекта | |||
| Resin | Mixing ratio by weight: 100 | ||
| Hardening method | Mixing ratio by weight: 26 |
| Дополнительная информация |
|---|
| Wear jet test : 35 W(V/t) [mm³/min] (internal tests) |
| Uncured Properties | Номинальное значение | Единица измерения | |
|---|---|---|---|
| Плотность (20°C) | 1.08 - 1.12 | g/cm³ | |
| Вязкость (25°C) | 5.3 - 6.3 | Pa·s | |
| Время отверждения (20°C) | 14 - 18 | hr | |
| Срок службы горшка 1(20°C) | 16 - 20 | min |
| Примечание | |
|---|---|
| 1 . | 200 g |
| Тип материала | Категория | Производитель |
|---|---|---|
| RenPIM® VG 5285 Polyol/ 5285 Isocyanate | PUR, Unspecified | Huntsman Advanced Materials |
| CONAP® EN-5310 | PUR, Unspecified | Cytec Industries Inc. |
| Ebalta SG 700 / PUR 5 | PUR, Unspecified | Ebalta Kunststoff GmbH |
| PolyBlend™ 1100 60A | PUR, Unspecified | CardioTech International, Inc. |
| Baydur® 730 IBS (48 pcf) | PUR-MDI | Covestro - PUR |
| Elastofoam® 38100R / 3120T | PUR, Unspecified | BASF Corporation |
Получите информацию об этом продукте следующим способом.
| Телефон | +086 13424755533 |
| EMAIL US | sales@su-jiao.com |
Служба поддержки клиентов Вичат | |
Copyright © russianpolymer.com All Rights Reserved