- Главная страница
- Поиск продуктов
- LLDPE
- FINGERPRINT™ DFDA-7510 NT
FINGERPRINT™ DFDA-7510 NT
| Категория | LLDPE, Polyethylene Resin |
| Производитель | The Dow Chemical Company |
| Торговая марка | FINGERPRINT™ |
| Порт | Китай Шанхайский порт |
| Торговые условия | FOB, CFR, CIF |
| Платежное средство | L/C, T/T, Western Union |
kP66lq_FINGERPRINT-DFDA-7510-NT.pdf  |
|
| Контактная информация |  Служба поддержки клиентов Вичат |
|
|
|
Описание материалов:
FINGERPRINT™DFDA-7510 NT linear low density polyethylene resin was prepared by UNIPOL™Processing technology. It is used in the processing of micro-irrigation pipes, durable hoses and pipe fittings, profile extrusion and injection molding fittings.
this product can also be used as a blending component for the modification of high pressure, ultra-low density, linear low density or high density polyethylene resin to improve its physical properties. Outdoor applications need to add UV stabilizers to maintain excellent performance under long-term UV exposure.
Main features:
slip agent content: none
opening agent content: none
industry standard
this product can also be used as a blending component for the modification of high pressure, ultra-low density, linear low density or high density polyethylene resin to improve its physical properties. Outdoor applications need to add UV stabilizers to maintain excellent performance under long-term UV exposure.
Main features:
- excellent environmental stress cracking resistance
- Excellent blasting strength
- Excellent stability and extrusion characteristics
- excellent softness, easy to wind up.
slip agent content: none
opening agent content: none
industry standard
- ASTM D 3350: step PE123110A
| Главная Информация | |
|---|---|
| Рейтинг агентства |
|
| Формы |
|
| Метод обработки |
|
| Физический | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Удельный вес | 0.920 | g/cm³ | ASTM D792 |
| Массовый расход расплава (MFR) | ASTM D1238 | ||
| 190°C/2.16 kg | 0.60 | g/10 min | ASTM D1238 |
| 190°C/21.6 kg | 44 | g/10 min | ASTM D1238 |
| Экологическое сопротивление растрескиванию 1(F0) | > 500 | hr | ASTM D1693A |
| Твердость | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Твердость дюрометра 2(Shore D) | 44 | ASTM D2240 |
| Механические | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Прочность на растяжение 3 | ASTM D638 | ||
| Yield | 11.0 | MPa | ASTM D638 |
| Fracture | 15.5 | MPa | ASTM D638 |
| Удлинение при растяжении 4(Break) | 800 | % | ASTM D638 |
| Флекторный модуль 5 | 310 | MPa | ASTM D790 |
| Тепловой | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Температура ломкости 6 | < -100 | °C | ASTM D746A |
| Экструзия | Номинальное значение | Единица измерения | |
|---|---|---|---|
| Температура расплава | 196 - 221 | °C |
| Инструкции по экструзии |
|---|
| 吹塑薄膜的制造条件： 螺杆类型：所有标准的商用挤出设备。 熔体温度范围：385 - 430 °F (196 - 221 °C) |
| Примечание | |
|---|---|
| 1 . | Prepare the compression molding fitting as per D3350; ASTM D 1928 procedure C. Attributes will vary with molding conditions and aging time. |
| 2 . | Prepare the compression molded fitting according to ASTM D 1928 procedure C. Attributes will vary with molding conditions and aging time. |
| 3 . | Prepare the compression molded fitting according to ASTM D 1928 procedure C. Attributes will vary with molding conditions and aging time. |
| 4 . | Prepare the compression molded fitting according to ASTM D 1928 procedure C. Attributes will vary with molding conditions and aging time. |
| 5 . | Prepare the compression molded fitting according to ASTM D 1928 procedure C. Attributes will vary with molding conditions and aging time. |
| 6 . | Prepare the compression molded fitting according to ASTM D 1928 procedure C. Attributes will vary with molding conditions and aging time. |
| Тип материала | Категория | Производитель |
|---|---|---|
| RELENE® LL24FA030 | LLDPE | Reliance Industries Limited |
| TAISOX 2114 | LLDPE | Formosa Plastics Corporation |
| TAISOX 3225 | LLDPE | Formosa Plastics Corporation |
| TABOND 3047 | LLDPE | SILON s.ro |
| NEFTEKHIM PE 4118Q (18403) | LLDPE | Nizhnekamskneftekhim Inc. |
| HANWHA LLDPE 3303 | LLDPE | Hanwha Chemical |
Получите информацию об этом продукте следующим способом.
| Телефон | +086 13424755533 |
| EMAIL US | sales@su-jiao.com |
Служба поддержки клиентов Вичат | |
Copyright © russianpolymer.com All Rights Reserved