- Главная страница
- Поиск продуктов
- PA12
- VESTAMID® NRG 1001 natural color
VESTAMID® NRG 1001 natural color
| Категория | PA12, Polyamide 12 , Nylon 12 |
| Производитель | Evonik Industries AG |
| Торговая марка | VESTAMID® NRG |
| Порт | Китай Шанхайский порт |
| Торговые условия | FOB, CFR, CIF |
| Платежное средство | L/C, T/T, Western Union |
fF5Nxx_VESTAMID-NRG-1001-natural-color.pdf  |
|
| Контактная информация |  Служба поддержки клиентов Вичат |
|
|
|
Описание материалов:
High viscosity, platicized, impact-modified, heat and light stabilized PA12 compound for extrusion.
VESTAMID®NRG 1001 is a plasticized PA 12 compound with heat and light stabilizers for the extrusion of flexible tubing and hoses especially for oil and petrochemical applications.
VESTAMID®NRG 1001 is characterized by easy processing and good dimensional control during pipe extrusion, especially when processing large pipe diameters.
Properties of compounds based on polyamide 12 vary little with changing humidity due to low moisture absorption
Parts made of the described semi-crystalline materialare characterized by exceptional impact strength, low coefficient of sliding friction and good chemical resistance.
VESTAMID®NRG 1001 is supplied ready for use in moisture-proof bags.
The recommended process temperature for extrusion is 220°C to 250°C.
VESTAMID®NRG 1001 is a plasticized PA 12 compound with heat and light stabilizers for the extrusion of flexible tubing and hoses especially for oil and petrochemical applications.
VESTAMID®NRG 1001 is characterized by easy processing and good dimensional control during pipe extrusion, especially when processing large pipe diameters.
Properties of compounds based on polyamide 12 vary little with changing humidity due to low moisture absorption
Parts made of the described semi-crystalline materialare characterized by exceptional impact strength, low coefficient of sliding friction and good chemical resistance.
VESTAMID®NRG 1001 is supplied ready for use in moisture-proof bags.
The recommended process temperature for extrusion is 220°C to 250°C.
| Главная Информация | |
|---|---|
| Добавка |
|
| Характеристики |
|
| Внешний вид |
|
| Метод обработки |
|
| Физический | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Плотность (23°C) | 1.02 | g/cm³ | ISO 1183 |
| Механические | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Модуль растяжения | 380 | MPa | ISO 527-2 |
| Tensile Stress | ISO 527-2 | ||
| Yield 1 | 26.0 | MPa | |
| Break | 38.0 | MPa | |
| Растяжимое напряжение | ISO 527-2 | ||
| Yield 2 | 35 | % | |
| Break 3 | > 200 | % | |
| Break | > 150 | % |
| Воздействие | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Ударная прочность | ISO 179/1eA | ||
| -30°C, Complete Break | 7.0 | kJ/m² | |
| 23°C, Partial Break | 130 | kJ/m² | |
| Charpy Unnotched Impact Strength | ISO 179/1eU | ||
| -30°C | No Break | ||
| 23°C | No Break |
| Тепловой | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Температура плавления 4 | 172 | °C | ISO 11357-3 |
| Экструзия | Номинальное значение | Единица измерения | |
|---|---|---|---|
| Температура расплава | 220 to 250 | °C |
| Примечание | |
|---|---|
| 1 . | Pipe Test Specimen |
| 2 . | Pipe Test Specimen |
| 3 . | Pipe Test Specimen |
| 4 . | 2nd Heating |
| Тип материала | Категория | Производитель |
|---|---|---|
| Rilsamid® AESNO TL | Nylon 12 | Arkema |
| VESTOSINT® 1141 gray 9.7200 | Nylon 12 | Evonik Industries AG |
| Rilsan® AMN D | Nylon 12 | Arkema |
| VESTAMID® E E40-S3 | Nylon 12 | Evonik Industries AG |
| Grilamid® L 20 H FR | Nylon 12 | EMS-GRIVORY |
| RTP 201 F | Nylon 12 | RTP Company |
Получите информацию об этом продукте следующим способом.
| Телефон | +086 13424755533 |
| EMAIL US | sales@su-jiao.com |
Служба поддержки клиентов Вичат | |
Copyright © russianpolymer.com All Rights Reserved