Dyna-Purge® B

Designed for Injection and Extrusion Blow Molding

DYNA-PURGE B is a non-abrasive, non-chemical engineered thermoplastic purging compound, formulated to flow naturally through the barrel and accumulator head. A non-melting but softening thermoplastic scrubs the screw and barrel, while the carrier matrix flushes away impurities.

FEATURES & BENEFITS:

• Excellent for color changes, resin changes, preventative machine maintenance, and before manual cleaning

• Developed for purging through the barrel and die head with a minimum clearance of .025 inch (.65 mm)

• Effective through a wide temperature range 320°F to 575°F (160°C to 302°C)

• Easy to use - no process adjustment necessary - use at the resident resin processing temperature and RPM speed

• Non-abrasive, non-melting but softening thermoplastic, which thoroughly loosens carbonized and degraded resin, allowing it to be flushed out of the system

• Safe, non-hazardous, with no chemicals - ingredients are FDA compliant

• Heat stable - recommended during shutdown and start-up

• Low "cost-per-purge" - only small quantity needed to be effective

• No mixing required - simply use "as is"

• Unlimited shelf life