- Главная страница
- Поиск продуктов
- LLDPE
- Arak LLDPE LL1209AA / LL1209KJ
Arak LLDPE LL1209AA / LL1209KJ
| Категория | LLDPE, Linear Low Density Polyethylene |
| Производитель | Shazand (Arak) Petrochemical Corporation |
| Торговая марка | Arak LLDPE |
| Порт | Китай Шанхайский порт |
| Торговые условия | FOB, CFR, CIF |
| Платежное средство | L/C, T/T, Western Union |
SAsKnS_Arak-LLDPE-LL1209AA-LL1209KJ.pdf  |
|
| Контактная информация |  Служба поддержки клиентов Вичат |
|
|
|
Описание материалов:
LL1209AA & LL1209KJ are linear low density polyethylene copolymers containing butene-1 as a co-monomer. LL1209AA & LL1209KJ are suitable for co extrusion blown films with the following advantages:
Typical applications for LL1209AA & LL1209KJ are lamination films and heat sealing layers. Also LL1209KJ is highly recommended for display packaging.
LL1209KJ offers high slip film with easy opening properties when used pure in thickness range 35-100 microns. Addition of other polymers, master batches and pigments or use of other thickness may alter film slip and anti-block performance.
Recommended melt temperature for extrusion is about 180°C-225°C.
LL1209AA & LL1209KJ should be stored in the dry condition below the 50°C and avoided from the exposure of direct sunlight.
* LL1209AA & LL1209KJ are suitable for food contact.
- Improved hot-tack.
- Good optical properties.
- Low gel level and low odour.
- Good substrate adhesion.
- Tough core layer.
Typical applications for LL1209AA & LL1209KJ are lamination films and heat sealing layers. Also LL1209KJ is highly recommended for display packaging.
LL1209KJ offers high slip film with easy opening properties when used pure in thickness range 35-100 microns. Addition of other polymers, master batches and pigments or use of other thickness may alter film slip and anti-block performance.
Recommended melt temperature for extrusion is about 180°C-225°C.
LL1209AA & LL1209KJ should be stored in the dry condition below the 50°C and avoided from the exposure of direct sunlight.
* LL1209AA & LL1209KJ are suitable for food contact.
| Главная Информация | |
|---|---|
| Добавка |
|
| Характеристики |
|
| Используется |
|
| Метод обработки |
|
| Физический | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Плотность | 0.920 | g/cm³ | ASTM D2838 |
| Массовый расход расплава (MFR) (190°C/2.16 kg) | 0.90 | g/10 min | ASTM D1238 |
| Пленки | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Толщина пленки протестирована | 38 | µm | |
| Толщина пленки-рекомендовано/доступно | 35 to 100µm | ||
| Прочность на растяжение | ASTM D882 | ||
| MD : Yield | 9.50 | MPa | |
| TD : Yield | 9.50 | MPa | |
| MD : Break | 38.0 | MPa | |
| TD : Break | 28.0 | MPa | |
| Удлинение при растяжении | ASTM D882 | ||
| MD : Break | 450 | % | |
| TD : Break | 800 | % | |
| Ударное падение Dart | 150 | g | ASTM D1709 |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD : 25 µm | 85 | g | |
| TD : 25 µm | 530 | g |
| Оптический | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Блеск (45°) | 70 | ASTM D2457 | |
| Haze | 5.0 | % | ASTM D1003 |
| Экструзия | Номинальное значение | Единица измерения | |
|---|---|---|---|
| Температура расплава | 180 to 225 | °C |
| Тип материала | Категория | Производитель |
|---|---|---|
| PrimaFlex® LSH 16001 | LLDPE | Plastic Solutions, Inc. |
| TAISOX 3310 | LLDPE | Formosa Plastics Corporation |
| Titanvene™ LL0218AA | LLDPE | PT. TITAN Petrokimia Nusantara |
| ExxonMobil™ LLDPE LL 8450 Series | LLDPE | ExxonMobil Chemical |
| Indothene LL LL 36RA045 UV | LLDPE | Reliance Industries Limited |
| Petrothene® GA568200 | LLDPE | LyondellBasell Industries |
Получите информацию об этом продукте следующим способом.
| Телефон | +086 13424755533 |
| EMAIL US | sales@su-jiao.com |
Служба поддержки клиентов Вичат | |
Copyright © russianpolymer.com All Rights Reserved