Описание материалов:
Geon® FIT E 51 is a medium molecular weight homopolymer resin intended for use as a Formulation Improvement Tool (FIT) in plastisol formulations which enhance the plastisol usage (pot life) and reduce the viscosity aging characteristics. This resin increases the physical properties of end application up to 30% compared to traditional blending resins. It allows the addition of up to 40phr of filler, significantly decreasing formulation costs. It improves air release properties, provides faster de -aeration time and reduces scrap rates caused by the presence of air bubbles or voids in finished part. This resin reduces the viscosity profile of the plastisol providing an improved 'ease of coating' performance resulting a more uniform plastisol coating and improving line up time.
Geon® FIT E 51 is recommeded for solid and foamed plastisol applications for instance coated fabrics and carpet tiles, cast films and coatings, rotationally and slush molded parts, dip molded and coated parts, and walk off and foam mats and pads.
| Физический | Номинальное значение | Единица измерения | Метод испытания |
|---|
| Удельный вес | 1.40 | g/cm³ | ASTM D792 |
| K-Value 1 | 67.0 | | Internal method |
| Видимая свободная плотность 2 | 0.530 | g/cm³ | Internal method |
| Внутренняя вязкость 3 | 0.92 | | ASTM D1243-60-A |
| Размер частиц | | | Internal method |
| < 52 micron 4 | 95.0 | % | Internal method |
| < 74 micron 5 | 99.0 | % | Internal method |
| Average Particle Size 6 | 30.0 | µm | Internal method |
| Relative Viscosity 7 | 2.23 | | Internal method |
| Оптический | Номинальное значение | Единица измерения | Метод испытания |
|---|
| Дымка-
Плавленый 5 минут @ 350F 8 | 58 | % | Internal method |
| Блеск-
60 градусов, плавленый 5 минут @ 350F 9 | 16 | % | Internal method |
| Анализ заполнения | Номинальное значение | Единица измерения | Метод испытания |
|---|
| Вязкость брокфилда | | | Internal method |
| Initial Viscosity @ 2 rpm 10 | 2.30 | Pa·s | Internal method |
| Initial Viscosity @ 20 rpm 11 | 2.40 | Pa·s | Internal method |
| One Day Viscosity @ 2 rpm 12 | 2.40 | Pa·s | Internal method |
| One Day Viscosity @ 20 rpm 13 | 2.45 | Pa·s | Internal method |
| Отрежьте отток-
95 фунтов на квадратный дюйм 14 | 504.00 | g/10 min | Internal method |
| Дополнительная информация | Номинальное значение | Единица измерения | Метод испытания |
|---|
| Остаточный винилхлорид мономер 15 | | ppm | Internal method |
| Испарители 16 | 0.070 | % | Internal method |
| Процесс полимеризации | Suspension | | |
| Температура геля 17 | 91 | °C | Internal method |
| Виниловый диффузор 18 | 95.0 | µm | Internal method |
| Note:The value set forth represent "typical" values and Mexichem Specialty Resins, therefore, makes no representation that the material in any particular shipment will conform to the listed properties.Packaging: This resin is shipped in multi-wall paper bags, net weight 50 lbs, 2500 lbs per pallet. Information shown on the package includes commercial identification number, lot and weight.Geon® ALTC (formulation): 60phr Geon® 121A, 40phr Geon® FIT E 51, 57phr DINP, 3phr ESO, and 2phr Therm-Chek SP 120 LOHFGeon® STP 1203(formulation): 60phr Geon® 178, 40phr Geon® FIT E 51,and 60phr DOP |
| Примечание |
|---|
| 1 . | Molten flow equivalent value |
| 2 . | Geon® STP 1169 |
| 3 . | Molten flow equivalent value |
| 4 . | Geon® DFT 1466 |
| 5 . | Geon® DFT 1466 |
| 6 . | Geon® 812 |
| 7 . | Molten flow equivalent value |
| 8 . | Geon® ATLC 66 (with provided formulation) |
| 9 . | Geon® ATLC 65 (with provided formulation) |
| 10 . | Geon® 1169 |
| 11 . | Geon® ATLC 22 (with provided formulation) |
| 12 . | Geon® ATLC 22 (with provided formulation) |
| 13 . | Geon® ATLC 22 (with provided formulation) |
| 14 . | Geon® ATLC 23 (with provided Formulation) |
| 15 . | Geon® DFT 1005 |
| 16 . | Bags, Geon®793 |
| 17 . | Geon® ATLC 29 (with provided formulation) |
| 18 . | Geon® STP 1203 (with provided formulation) |
