Описание материалов:
XT-153 is a two component condensation cure silicone rubber mold making material. It differs from most silicone rubber materials in that it is translucent rather than opaque. In thin sections, it is nearly transparent. It has been designed with a low viscosity to enable it to reproduce intricate detail and a very low durometer that allows maximum flexibility. It can also be easily colored by the addition of appropriate pigments. This unique combination of properties makes XT-153 well-suited for the special effects and movie making industries.
| Главная Информация | |
|---|
| Характеристики | - Хорошая цветность
- Хорошая гибкость
- Низкая вязкость
|
| Формы | |
| Физический | Номинальное значение | Единица измерения | |
|---|
| Удельный вес 1 | 1.06 | g/cm³ | |
| Усадка-
Вылеченный | 0.10 | % | |
| Uncured Properties | Номинальное значение | Единица измерения | |
|---|
| Цвет | | | |
| -- 2 | Translucent | | |
| -- 3 | Translucent | | |
| Вязкость | | | |
| -- 4 | 0.30 to 0.40 | Pa·s | |
| -- 5 | 20 to 30 | Pa·s | |
| Время отверждения | 18 to 24 | hr | |
| Срок службы горшка | 60 to 120 | min | |
| Cured Properties | Номинальное значение | Единица измерения | |
|---|
| Твердость по суше | | | |
| Shore A 6 | 2 to 4 | | |
| Shore A 7 | 5 to 8 | | |
| Прочность на растяжение | 1.34 to 1.69 | MPa | |
| Удлинение при разрыве | 450 to 500 | % | |
| Tear Strength | 7.01 to 10.5 | kN/m | |
| Примечание |
|---|
| 1 . | Cured |
| 2 . | Activator |
| 3 . | Base |
| 4 . | Activator |
| 5 . | Base |
| 6 . | 1 Day |
| 7 . | 7 Days |
